Polymaker PC-ABS

Printing Temperature: 250˚C - 270˚C
Bed Temperature: 90˚C - 105˚C
Chamber Temperature: 90˚C - 105˚C
Printing Speed: 30mm/s - 50mm/s
Fan: OFF

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 75˚C for 6h
(Only if the material has absorbed moisture)

Annealing Settings: 90˚ for 2h

Print Profiles:

Can't find the profile you are looking for? Join our very active Discord where thousands of members may have already made the profile you need.

What is annealing?

You can find out more about annealing HERE

Will the spools work in an AMS?

Yes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.

Does PC absorbs moisture?

The short answer is yes, PolyLite™ PC will absorb moisture slightly faster than regular PLA. We recommend using a dry box to achieve high quality and strong prints.

Why are my parts cracking along layer lines?

You really need to make sure you are using an enclosed printer and that you are keeping ambient air temps as high as possible. You then want to make sure you are annealing the part the moment the print finishes. Keeping ambient air temps high and allowing for very slow cooling is a great way to reduce chances of cracking and to maintain layer strength.